Emery Roll Rice Milling Machine Common Use

Introduction

• Optimize of cutting and rubbing off, reducing the workpiece on rice shear and friction.

• Optimization of design parameters, the overall rice knives, milling good white effect, High precision, low broken rate than similar products.

• Using two-way air inlet shaft, supplemented by material inlet and outlet and multi-screen doorInto the wind, the wind net external centralized, air inlet volume, milled white room temperature is low,Effectively reduce the temperature of food grains, bran drain cleaner.

Engineering theory sharing

In order to improve the quality of rice milling, operators should pay attention to the adjustment of the main parameters of the rice milling machine when using the rice milling machine: mainly adjust the gap between the rice knife and the drum.

If the gap is large, the pressure in the whitening chamber is small, and the friction force received by the rice in the rolling bar is weak, so the rice cannot be polished, and the pushed rice is not white, but the rice yield is high; When the feed and discharge adjustment is large, the discharge closure is small, the grain in the whitening chamber increases and the pressure increases.

The milled rice is white, but there is more rice. Conversely, if the inlet knife is closed, the outlet knife is opened. The rice at the outlet gate is less, the pressure is reduced, and the milled rice will become coarser.